3D Printer Enclosures from 3DUPfitters

COVID-19 Shipping Status

COVID-19 Shipping Status

by Michael Czeiszperger
7/26/2020 Update Right now we have all products in stock and everything is shipping normally.  We typically ship your orders in 1-3 business days, ...
COVID-19 shipping
3D Printing PLA, PETG and ABS while Protecting Your Lungs with an Enclosure

3D Printing PLA, PETG and ABS while Protecting Your Lungs with an Enclosure

by Michael Czeiszperger
A lot of 3D printer enthusiasts start out putting a cardboard box over the printer, but there’s a lot more to it than that!  This article will expl...
3d printer 3d printing enclosure Sticky temperature tutorial
Ender 5 Plus Settings for Simplify3D

Ender 5 Plus Settings for Simplify3D

by Michael Czeiszperger
At 3DUPfitters we are big fans of Simplify3D, but sometimes they don't always publish a profile for your printer.  (Or one that's not so great.) In...
3D Printer Enclosure Ender Ender 5
Introducing the Ender 5 Plus Enclosure

Introducing the Ender 5 Plus Enclosure

by Michael Czeiszperger
I'm excited that after spending months on three major designs for the Ender 5 Plus this last enclosure is finally ready to send out in the world. A...
3D Printer Enclosure Creality Ender 5 Plus
Prusa MMU2S Multi-Material 3D Printer Cart

Prusa MMU2S Multi-Material 3D Printer Cart

by Michael Czeiszperger
Note:  This product has been discontinued in favor of the new MMU enclosure. Unfortunately the new enclosure won't fit on this cart so we're redesi...
Introducing a Cart Worthy of the Prusa

Introducing a Cart Worthy of the Prusa

by Michael Czeiszperger
Its been almost a year since first starting to design a 3D printer cart, and it's gone through several iterations and prototypes.  The project has...
Makergear M3 Enclosure is Shipping!

Makergear M3 Enclosure is Shipping!

by Michael Czeiszperger
We are excited to announce an acrylic enclosure for the Makergear M3-SE! At $2,550 we expected a lot from this printer, and the parts did not disap...
Introducing an All Acrylic Enclosure for the Artillery Sidewinder X1

Introducing an All Acrylic Enclosure for the Artillery Sidewinder X1

by Michael Czeiszperger
For all of you Artillery Sidewinder X1 fans out there, we just finished testing the enclosure. The stock spool holder was great, so we designed a m...
The Creality Ender 5 Enclosure is Ready!

The Creality Ender 5 Enclosure is Ready!

by Michael Czeiszperger
The Ender 5 is a major design departure from the Ender 3, improving upon the former's bed flinger design by utilizing a rigid open frame that deliv...
3D Printing with PLA Inside an Enclosure

3D Printing with PLA Inside an Enclosure

by Michael Czeiszperger

After a couple of posts appeared online about problems printing PLA inside an enclosure we were contacted by a customer asking if the enclosure would harm their stepper motors or cause clogs.  

Michael Czeiszperger, B.S.E.E. The Ohio State University

Clog enclosure Prusa
Powering 3D Printers and Enclosures

Powering 3D Printers and Enclosures

by Michael Czeiszperger
One question we get is:  do we have to take apart the printer and attach wires to make the fans and lights work? The answer is no!  Most people don...
Moving the carbon air filters to the side

Moving the carbon air filters to the side

by Michael Czeiszperger
Enclosures can get pretty big, and sometimes there's not a lot of space in back to fit between the table and the wall. In those cases, you can 3D p...
carbon air filter